wine-devel May 2017

wine-devel@winehq.org

52 participants
182 discussions

Re: [PATCH] user32: add GetPhysicalCursorPos/SetPhysicalCursorPos stubs
by Ken Thomases 16 May '17

16 May '17

On May 15, 2017, at 9:11 PM, Austin English <austinenglish(a)gmail.com> wrote: > > https://bugs.winehq.org/show_bug.cgi?id=42985 > > -- > -Austin > GPG: 14FB D7EA A041 937B > --- > dlls/user32/input.c | 14 ++++++++++++++ > dlls/user32/user32.spec | 2 ++ > 2 files changed, 16 insertions(+) Shouldn't these just pass through to GetCursorPos() and SetCursorPos(), respectively? Their docs refer to the docs for PhysicalToLogicalPoint()[1], which says that a) the distinction is only meaningful for Vista-style DPI scaling, which Wine doesn't support; and b) since Windows 8.1, even that distinction has been eliminated by DPI virtualization. [1] https://msdn.microsoft.com/en-us/library/windows/desktop/ms633536(v=vs.85).… -Ken

1 0

Transferring D3D textures to OpenGL or Vulkan contexts in Winelib
by Ben "Root" Anderson 15 May '17

15 May '17

I'd like to start a discussion here and see where it goes. First, my usecase. I want to write a wrapper that connects Windows SteamVR applications running under Wine to the native Linux SteamVR runtime. Because it's the same API on both sides, this is very straightforward, except for one crucial element. In their API, the application does not (necessarily) output the rendered frame to a window, instead submitting the frame to their VR compositor as either an ID3D11Texture, a struct describing a D3D12 texture, an OpenGL texture or render buffer name, or a struct describing a Vulkan texture. For obvious reasons, the latter two are the options available on Linux, making them very straightforward for a Winelib DLL. The former two... not so much. The vast majority of SteamVR applications are currently using Direct3D 11, which means for any of this to work with them, I need some way to convert an ID3D11Texture to the appropriate OpenGL or (preferably) Vulkan equivalent that SteamVR is expecting. I've looked high and low and see no way to do this, neither through Windows APIs nor Winelib. Just to get things working for now, I'll likely figure out a way to invoke wined3d_texture_get_gl_buffer() or similar from outside Wine itself, but that's a dirty hack at best and likely to break frequently (eventually, maybe permanently) as Wine evolves. Thoughts?

2 2

Re: [PATCH 5/6] d3dx9: Avoid redundant constant tables updates.
by Matteo Bruni 15 May '17

15 May '17

2017-05-12 14:24 GMT+02:00 Paul Gofman <gofmanp(a)gmail.com>: > +static void set_preshader_modified(struct d3dx_preshader *pres) > +{ > + unsigned int i; > + > + for (i = 0; i < pres->ins_count; ++i) > + { > + const struct d3dx_pres_ins *ins = &pres->ins[i]; > + const struct d3dx_pres_reg *reg = &ins->output.reg; > + > + regstore_set_modified(&pres->regs, reg->table, reg->offset, > + pres_op_info[ins->op].func_all_comps ? 1 : ins->component_count); > + } > +} This looks a bit ugly but I imagine it's actually okay in practice. Not that I can think of anything better either. E.g. I'm not sure that storing an array of register ranges to dirtify (i.e. precomputing this preshader scan) is really an improvement.

1 0

[v6 PATCH 00/21] x86: Enable User-Mode Instruction Prevention
by Ricardo Neri 15 May '17

15 May '17

This is v6 of this series. The five previous submissions can be found here [1], here [2], here[3], here[4], and here[5]. This version addresses the comments received in v4 plus improvements of the handling of emulation in 64-bit builds. Please see details in the change log. === What is UMIP? User-Mode Instruction Prevention (UMIP) is a security feature present in new Intel Processors. If enabled, it prevents the execution of certain instructions if the Current Privilege Level (CPL) is greater than 0. If these instructions were executed while in CPL > 0, user space applications could have access to system-wide settings such as the global and local descriptor tables, the segment selectors to the current task state and the local descriptor table. These are the instructions covered by UMIP: * SGDT - Store Global Descriptor Table * SIDT - Store Interrupt Descriptor Table * SLDT - Store Local Descriptor Table * SMSW - Store Machine Status Word * STR - Store Task Register If any of these instructions is executed with CPL > 0, a general protection exception is issued when UMIP is enabled. === How does it impact applications? There is a caveat, however. Certain applications rely on some of these instructions to function. An example of this are applications that use WineHQ[6]. For instance, these applications rely on sidt returning a non- accessible memory location[8]. During the discussions, it was proposed that the fault could be relied to the user-space and perform the emulation in user-mode. However, this would break existing applications until, for instance, they update to a new WineHQ version. However, this approach would require UMIP to be disabled by default. The consensus in this forum is to always enable it. This patchset initially treated tasks running in virtual-8086 mode as a special case. However, I received clarification that DOSEMU[8] does not support applications that use these instructions. It relies on WineHQ for this [9]. Furthermore, the applications for which the concern was raised run in protected mode [8]. Please note that UMIP is always enabled for both 64-bit and 32-bit Linux builds. However, emulation of the UMIP-protected instructions is not done for 64-bit processes. 64-bit user space applications will receive the SIGSEGV signal when UMIP instructions causes a general protection fault. === How are UMIP-protected instructions emulated? This version keeps UMIP enabled at all times and by default. If a general protection fault caused by the instructions protected by UMIP is detected, such fault will be fixed-up by returning dummy values as follows: * SGDT and SIDT return hard-coded dummy values as the base of the global descriptor and interrupt descriptor tables. These hard-coded values correspond to memory addresses that are near the end of the kernel memory map. This is also the case for virtual-8086 mode tasks. In all my experiments in x86_32, the base of GDT and IDT was always a 4-byte address, even for 16-bit operands. Thus, my emulation code does the same. In all cases, the limit of the table is set to 0. * STR and SLDT return 0 as the segment selector. This looks appropriate since we are providing a dummy value as the base address of the global descriptor table. * SMSW returns the value with which the CR0 register is programmed in head_32/64.S at boot time. This is, the following bits are enabled: CR0.0 for Protection Enable, CR.1 for Monitor Coprocessor, CR.4 for Extension Type, which will always be 1 in recent processors with UMIP; CR.5 for Numeric Error, CR0.16 for Write Protect, CR0.18 for Alignment Mask. As per the Intel 64 and IA-32 Architectures Software Developer's Manual, SMSW returns a 16-bit results for memory operands. However, when the operand is a register, the results can be up to CR0[63:0]. Since the emulation code only kicks-in in x86_32, we return up to CR[31:0]. * The proposed emulation code is handles faults that happens in both protected and virtual-8086 mode. === How is this series laid out? ++ Fix bugs in MPX address evaluator I found very useful the code for Intel MPX (Memory Protection Extensions) used to parse opcodes and the memory locations contained in the general purpose registers when used as operands. I put some of this code in a separate library file that both MPX and UMIP can access and avoid code duplication. Before creating the new library, I fixed a couple of bugs that I found in how MPX determines the address contained in the instruction and operands. ++ Provide a new x86 instruction evaluating library With bugs fixed, the MPX evaluating code is relocated in a new insn-eval.c library. The basic functionality of this library is extended to obtain the segment descriptor selected by either segment override prefixes or the default segment by the involved registers in the calculation of the effective address. It was also extended to obtain the default address and operand sizes as well as the segment base address. Also, support to process 16-bit address encodings. Armed with this arsenal, it is now possible to determine the linear address onto which the emulated results shall be copied. This code supports Normal 32-bit and 64-bit (i.e., __USER32_CS and/or __USER_CS) protected mode, virtual-8086 mode, 16-bit protected mode with 32-bit base address. ++ Emulate UMIP instructions A new fixup_umip_exception functions inspect the instruction at the instruction pointer. If it is an UMIP-protected instruction, it executes the emulation code. This uses all the address-computing code of the previous section. ++ Add self-tests Lastly, self-tests are added to entry_from_v86.c to exercise the most typical use cases of UMIP-protected instructions in a virtual-8086 mode. ++ Extensive tests Extensive tests were performed to test all the combinations of ModRM, SiB and displacements for 16-bit and 32-bit encodings for the ss, ds, es, fs and gs segments. Tests also include a 64-bit program that uses segmentation via fs and gs. For this purpose, I temporarily, and not as part of this patchset, enabled UMIP support for 64-bit process with the intention to test the computations of linear addresses in 64-bit mode, including the extra R8-R15 registers. Extensive test is also implemented for virtual-8086 tasks. Code of these tests can be found here [10] and here [11]. [1]. https://lwn.net/Articles/705877/ [2]. https://lkml.org/lkml/2016/12/23/265 [3]. https://lkml.org/lkml/2017/1/25/622 [4]. https://lkml.org/lkml/2017/2/23/40 [5]. https://lkml.org/lkml/2017/3/3/678 [7]. https://www.winehq.org/ [8]. https://www.winehq.org/pipermail/wine-devel/2016-November/115320.html [9]. http://www.dosemu.org/ [9]. http://marc.info/?l=linux-kernel&m=147876798717927&w=2 [10]. https://github.com/01org/luv-yocto/tree/rneri/umip/meta-luv/recipes-core/um… [11]. https://github.com/01org/luv-yocto/commit/a72a7fe7d68693c0f4100ad86de6ecabd… Thanks and BR, Ricardo Changes since V5: * Relocate the page fault error code enumerations to traps.h Changes since V4: * Audited patches to use braces in all the branches of conditional. statements, except those in which the conditional action only takes one line. * Implemented support in 64-builds for both 32-bit and 64-bit tasks in the instruction evaluating library. * Split segment selector function in the instruction evaluating library into two functions to resolve the segment type by instruction override or default and a separate function to actually read the segment selector. * Fixed a bug when evaluating 32-bit effective addresses with 64-bit kernels. * Split patches further for for easier review. * Use signed variables for computation of effective address. * Fixed issue with a spurious static modifier in function insn_get_addr_ref found by kbuild test bot. * Removed comparison between true and fixup_umip_exception. * Reworked check logic when identifying erroneous vs invalid values of the SiB base and index. Changes since V3: * Limited emulation to 32-bit and 16-bit modes. For 64-bit mode, a general protection fault is still issued when UMIP-protected instructions are executed with CPL > 0. * Expanded instruction-evaluating code to obtain segment descriptor along with their attributes such as base address and default address and operand sizes. Also, support for 16-bit encodings in protected mode was implemented. * When getting a segment descriptor, this include support to obtain those of a local descriptor table. * Now the instruction-evaluating code returns -EDOM when the value of registers should not be used in calculating the effective address. The value -EINVAL is left for errors. * Incorporate the value of the segment base address in the computation of linear addresses. * Renamed new instruction evaluation library from insn-kernel.c to insn-eval.c * Exported functions insn_get_reg_offset_* to obtain the register offset by ModRM r/m, SiB base and SiB index. * Improved documentation of functions. * Split patches further for easier review. Changes since V2: * Added new utility functions to decode the memory addresses contained in registers when the 16-bit addressing encodings are used. This includes code to obtain and compute memory addresses using segment selectors for real-mode address translation. * Added support to emulate UMIP-protected instructions for virtual-8086 tasks. * Added self-tests for virtual-8086 mode that contains representative use cases: address represented as a displacement, address in registers and registers as operands. * Instead of maintaining a static variable for the dummy base addresses of the IDT and GDT, a hard-coded value is used. * The emulated SMSW instructions now return the value with which the CR0 register is programmed in head_32/64.S This is: PE | MP | ET | NE | WP | AM. For x86_64, PG is also enabled. * The new file arch/x86/lib/insn-utils.c is now renamed as arch/x86/lib/ insn-kernel.c. It also has its own header. This helps keep in sync the the kernel and objtool instruction decoders. Also, the new insn-kernel.c contains utility functions that are only relevant in a kernel context. * Removed printed warnings for errors that occur when decoding instructions with invalid operands. * Added more comments on fixes in the instruction-decoding MPX functions. * Now user_64bit_mode(regs) is used instead of test_thread_flag(TIF_IA32) to determine if the task is 32-bit or 64-bit. * Found and fixed a bug in insn-decoder in which X86_MODRM_RM was incorrectly used to obtain the mod part of the ModRM byte. * Added more explanatory code in emulation and instruction decoding code. This includes a comment regarding that copy_from_user could fail if there exists a memory protection key in place. * Tested code with CONFIG_X86_DECODER_SELFTEST=y and everything passes now. * Prefixed get_reg_offset_rm with insn_ as this function is exposed via a header file. For clarity, this function was added in a separate patch. Changes since V1: * Virtual-8086 mode tasks are not treated in a special manner. All code for this purpose was removed. * Instead of attempting to disable UMIP during a context switch or when entering virtual-8086 mode, UMIP remains enabled all the time. General protection faults that occur are fixed-up by returning dummy values as detailed above. * Removed umip= kernel parameter in favor of using clearcpuid=514 to disable UMIP. * Removed selftests designed to detect the absence of SIGSEGV signals when running in virtual-8086 mode. * Reused code from MPX to decode instructions operands. For this purpose code was put in a common location. * Fixed two bugs in MPX code that decodes operands. Ricardo Neri (21): x86/mpx: Use signed variables to compute effective addresses x86/mpx: Do not use SIB index if index points to R/ESP x86/mpx: Do not use R/EBP as base in the SIB byte with Mod = 0 x86/mpx, x86/insn: Relocate insn util functions to a new insn-kernel x86/insn-eval: Add utility functions to get register offsets x86/insn-eval: Add utility functions to get segment selector x86/insn-eval: Add utility function to get segment descriptor x86/insn-eval: Add utility function to get segment descriptor base address x86/insn-eval: Add functions to get default operand and address sizes x86/insn-eval: Do not use R/EBP as base if mod in ModRM is zero insn/eval: Incorporate segment base in address computation x86/insn: Support both signed 32-bit and 64-bit effective addresses x86/insn-eval: Add support to resolve 16-bit addressing encodings x86/insn-eval: Add wrapper function for 16-bit and 32-bit address encodings x86/mm: Relocate page fault error codes to traps.h x86/cpufeature: Add User-Mode Instruction Prevention definitions x86: Add emulation code for UMIP instructions x86/umip: Force a page fault when unable to copy emulated result to user x86/traps: Fixup general protection faults caused by UMIP x86: Enable User-Mode Instruction Prevention selftests/x86: Add tests for User-Mode Instruction Prevention arch/x86/Kconfig | 10 + arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/disabled-features.h | 8 +- arch/x86/include/asm/insn-eval.h | 23 + arch/x86/include/asm/traps.h | 18 + arch/x86/include/asm/umip.h | 15 + arch/x86/include/uapi/asm/processor-flags.h | 2 + arch/x86/kernel/Makefile | 1 + arch/x86/kernel/cpu/common.c | 16 +- arch/x86/kernel/traps.c | 4 + arch/x86/kernel/umip.c | 298 +++++++++ arch/x86/lib/Makefile | 2 +- arch/x86/lib/insn-eval.c | 832 ++++++++++++++++++++++++++ arch/x86/mm/fault.c | 88 ++- arch/x86/mm/mpx.c | 120 +--- tools/testing/selftests/x86/entry_from_vm86.c | 39 +- 16 files changed, 1301 insertions(+), 176 deletions(-) create mode 100644 arch/x86/include/asm/insn-eval.h create mode 100644 arch/x86/include/asm/umip.h create mode 100644 arch/x86/kernel/umip.c create mode 100644 arch/x86/lib/insn-eval.c -- 2.9.3

7 109

Wine 2.8 source code
by Игорь Чебаненко 15 May '17

15 May '17

Wine 2.8 scanned with Cppcheck 1.72 There is A LOT of "noise" but I hope it will be helpfull for you.

1 0

Re: [RFC] README: Update Linux version requirement to 2.3.31.
by wylda＠volny.cz 15 May '17

15 May '17

>>> When I run winecfg, I got: >>> >>> wine: glibc >= 2.3 without NPTL or TLS is not a supported combination. >>> Please upgrade to a glibc with NPTL support. >>> >>> >>> Should I interpret that message, that: >>> 1. NPTL is required >>> 2. I should use glibc-2.2 or lower >>> >>> If 1) that's probably end of game per https://lwn.net/Articles/10465/ >>> * "- The 2.5.36 kernel or above must be installed and used." >>> * "The current snapshot for glibc 2.3 (or glibc 2.3 when released) is >>> necessary." >>> * "The general compiler requirement for glibc is at least gcc 3.2." >>> >>> So for further steps 1) or 2) ? >> >>A glibc using TLS might still work without NPTL, though that may require >>glibc 2.3 anyway. > >Yes, TLS was added to 2.5.29: >https://www.kernel.org/pub/linux/kernel/v2.5/ChangeLog-2.5.29 > >...and further improved in 2.5.32: >https://lwn.net/Articles/7591/ > >> Note that the above requirements are for building >>glibc, not running it. > >Short version: hint for 2.3 is probably not correct > >Longer version based on Glibc's release notes: > >glibc-2.3: Even though TLS support is mentioned as one new feature for this release >the default is not to build glibc with TLS support enabled. This has >several reasons, most of which are out of control of the glibc >developers. Therefore it is necessry to *not* use the --with-tls option >for configure. > >=no support for TLS & NPTL in glibc-2.3. > >glibc-2.3.2: ELF thread-local storage support (TLS) now works on x86-64. >glibc-2.3.2: The sources were also prepared to be used with the NPTL > thread library which is not yet included. > >=no support for NPTL in glibc-2.3.2 itself > >glibc-2.3.3: The main glibc-2.3.3 release >package contains the Native POSIX Threads Library (NPTL) contributed >by Ulrich Drepper, which supports Linux 2.6 kernels only. > > > > The NPTL support was backported to older kernels IIRC. > >It seems, that RedHat did that... >http://rpm.pbone.net/index.php3/stat/4/idpl/18727833/dir/fedora_1/com/kerne… > >I'm not fan of Fedora, so i could try your initially suggested >"A glibc using TLS might still work without NPTL...", i.e. >kernel-2.5.32 + rebuild of glibc-2.3.2, but i find that >glibc recipe pretty painful. But if you are expecting rather >2.4.xx results, that would be for some Fedora/RedHat fans. > >Anyway, i don't see chances for anything like subject mentioned >linux v2.3.31. > One more note: Debian Sarge includes glibc-2.3.2 and shows: "Thread-local storage support included" and does not mention NPTL. But kernel is 2.4.27 (without kernel side TLS), so winecfg complains. So i could also easily try Sarge's alternative kernel 2.6.8 instead of 2.4.27. Then TLS is supported in this glibc without NPTL and see if, winecfg is happy. That is the easiest step.

1 0

Re: [RFC] README: Update Linux version requirement to 2.3.31.
by wylda＠volny.cz 15 May '17

15 May '17

>> When I run winecfg, I got: >> >> wine: glibc >= 2.3 without NPTL or TLS is not a supported combination. >> Please upgrade to a glibc with NPTL support. >> >> >> Should I interpret that message, that: >> 1. NPTL is required >> 2. I should use glibc-2.2 or lower >> >> If 1) that's probably end of game per https://lwn.net/Articles/10465/ >> * "- The 2.5.36 kernel or above must be installed and used." >> * "The current snapshot for glibc 2.3 (or glibc 2.3 when released) is >> necessary." >> * "The general compiler requirement for glibc is at least gcc 3.2." >> >> So for further steps 1) or 2) ? > >A glibc using TLS might still work without NPTL, though that may require >glibc 2.3 anyway. Yes, TLS was added to 2.5.29: https://www.kernel.org/pub/linux/kernel/v2.5/ChangeLog-2.5.29 ...and further improved in 2.5.32: https://lwn.net/Articles/7591/ > Note that the above requirements are for building >glibc, not running it. Short version: hint for 2.3 is probably not correct Longer version based on Glibc's release notes: glibc-2.3: Even though TLS support is mentioned as one new feature for this release the default is not to build glibc with TLS support enabled. This has several reasons, most of which are out of control of the glibc developers. Therefore it is necessry to *not* use the --with-tls option for configure. =no support for TLS & NPTL in glibc-2.3. glibc-2.3.2: ELF thread-local storage support (TLS) now works on x86-64. glibc-2.3.2: The sources were also prepared to be used with the NPTL thread library which is not yet included. =no support for NPTL in glibc-2.3.2 itself glibc-2.3.3: The main glibc-2.3.3 release package contains the Native POSIX Threads Library (NPTL) contributed by Ulrich Drepper, which supports Linux 2.6 kernels only. > The NPTL support was backported to older kernels IIRC. It seems, that RedHat did that... http://rpm.pbone.net/index.php3/stat/4/idpl/18727833/dir/fedora_1/com/kerne… I'm not fan of Fedora, so i could try your initially suggested "A glibc using TLS might still work without NPTL...", i.e. kernel-2.5.32 + rebuild of glibc-2.3.2, but i find that glibc recipe pretty painful. But if you are expecting rather 2.4.xx results, that would be for some Fedora/RedHat fans. Anyway, i don't see chances for anything like subject mentioned linux v2.3.31.

1 0

Re: [RFC] README: Update Linux version requirement to 2.3.31.
by wylda＠volny.cz 15 May '17

15 May '17

>>>If winecfg runs, that should be good enough. Optional packages can be >>>backported if necessary. >>> >> >>OK, then I will concentrate on min kernel version :) >> Currently I build wine-2.8 on machine with: * Linux-v2.4.27-3-386 * gcc-v3.3.5 * libc6-v2.3.2 There were few failures which I overcome by not building these components: * dwrite * winealsa.drv * wmvcore * ws2_32 * programs/winhlp32 When I run winecfg, I got: wine: glibc >= 2.3 without NPTL or TLS is not a supported combination. Please upgrade to a glibc with NPTL support. Should I interpret that message, that: 1. NPTL is required 2. I should use glibc-2.2 or lower If 1) that's probably end of game per https://lwn.net/Articles/10465/ * "- The 2.5.36 kernel or above must be installed and used." * "The current snapshot for glibc 2.3 (or glibc 2.3 when released) is necessary." * "The general compiler requirement for glibc is at least gcc 3.2." So for further steps 1) or 2) ? wmvcore and winhlp32 look like a real bugs. Others failures can be probably be solved by using newer components. I can open bugreports, if anyone is interested. Regards, W.

2 1

Re: [PATCH 2/2] uninstaller: Allocate enough memory to null-terminate the command string
by Alexandre Julliard 15 May '17

15 May '17

Hugh McMaster <hugh.mcmaster(a)outlook.com> writes: > @@ -245,7 +245,7 @@ static int FetchFromRootKey(HKEY root) > type == REG_DWORD && value == 1) > { > static const WCHAR fmtW[] = {'m','s','i','e','x','e','c',' ','/','x','%','s',0}; > - command = HeapAlloc(GetProcessHeap(), 0, (lstrlenW(fmtW) + lstrlenW(subKeyName)) * sizeof(WCHAR)); > + command = HeapAlloc(GetProcessHeap(), 0, (lstrlenW(fmtW) + sizeOfSubKeyName + 1) * sizeof(WCHAR)); The %s in the format gets replaced, so the existing code is fine. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH] dwrite: Fix locale data buffer length passed to GetLocaleInfoEx()
by Alexandre Julliard 15 May '17

15 May '17

Nikolay Sivov <nsivov(a)codeweavers.com> writes: > @@ -1106,8 +1109,8 @@ static HRESULT WINAPI dwritetextanalyzer_GetGlyphs(IDWriteTextAnalyzer2 *iface, > struct scriptshaping_context context; > struct scriptshaping_cache *cache = NULL; > BOOL update_cluster, need_vertical; > + WCHAR digits[native_digits_length]; It would have to be a #define if you want to do this. -- Alexandre Julliard julliard(a)winehq.org

1 0

← Newer
1
...
7
8
9
10
11
12
13
...
19
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel May 2017