wine-devel

wine-devel@winehq.org

84463 discussions

Re: Documentation fixes
by Alexandre Julliard 13 Jul '01

13 Jul '01

Patrik Stridvall <ps(a)leissner.se> writes: > For normal entry point, however, I respectfully disagree. > One of the major reasons of having automatically > generated .spec files is to avoid having to > store redundant information. The needed information > is already in the C function declaration and storing > in a comment as well brings us back to the current > situation. Sure it makes that generator less > complicatated but it really isn't that important > as long as it is reliable and not ambigeous. IMO, this is true if we can make the generator work purely on the source code, so that you can give it the unmodified source of a Windows dll and it spits out the spec file. If you need to add comments before each and every exported function, then I don't see much advantage to parsing the source. You might as well put all the information in the comment (or leave it in the current spec file for that matter). Basically, if the source parsing allows doing more than we do now (like build spec files for new dlls) it's worthwhile; if all it does is generate the existing spec files some other way I don't think there's much point. After all, we have the spec files already, and they are not going to change much. Another use of the source parser could be to generate more detailed debugging information for +relay; but in this case I'd say it should go to a completely different file, used by some external relay dumping program. I don't want all the extra debug information to clutter up the spec files. -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: GetCommState16 ....
by lawson_whitney＠juno.com 13 Jul '01

13 Jul '01

Good day! If you get this, neither this patch nor any of the recently committed patches that muck with 16 bit comms bother my 16 bit comms app. Mike, did you not get juno.tar.gz or do you just not want to be bothered filling in the junk to make a new account? Regards, Lawson ---cut--- ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj.

1 0

hello all
by Brandon Kilgore 13 Jul '01

13 Jul '01

Hi everyone, Just letting you all know that there's a new listener out here, eager to pick up on what you're discussing. I'm only 17, so I'll be pretty much staying out of the way, but I love programming so hopefully you won't mind if I stick my hand up to ask a question or respond to someone every once in a while. Just so you can know a bit about me...I used to be a purely QBasic programmer in my "early" days, but a few years ago I began broadening my horizons, mostly with HTML and Visual Basic. For a long time I had wanted to learn C but never really got around to it, but a little over a year ago I finally sat down and started learning, and now its one of the only languages I ever use. Some other languages I currently program in (or would come back to me if need be :-) : C/C++/Visual C++ (Q)Basic/Visual Basic HTML Perl BF (there's an interesting language...) Java/JavaScript WISE InstallMaster scripting ;-) Anyways, I'll let you all get back to the important development discussions. I'll be talking to you... - Brandon

2 2

RE: Documentation fixes
by Patrik Stridvall 13 Jul '01

13 Jul '01

> Patrik Stridvall <ps(a)leissner.se> writes: > > > Like: > > > > > /************************************************************* > ********** > > * strcpy (MSVCRT.@) > > */ > > #if 0 /* Suppress warnings */ > > extern char *strcpy(char *dest, const char *src); > > #endif > > > > Perhaps we could do the same with atom functions and lstrcmpi? > > The #if 0 #endif isn't even needed for them I believe. > > That's quite ugly IMO. The #if 0 #endif or having to have a documentation comment at all? Anyway the #if 0 is not needed I thought it might be needed in some cases but it is not. I mistakingly believed it might be type conflicts but it can't be since any exported function must of course use the C library types otherwise you can't export them directly. If you are refering to the documentation comment, I can't really see why. All other functions have it and adding additional documentation might be a good idea in some cases as well. Furthermore the extern declaration makes it possible for the C compiler to check that the prototype is the same as the prototype in the included files. I spotted several error when doing the patch because of this. As hinted above, I have implemented a working solution that does what I have described above. See separate mail. > As long as we require comments, we might as > well put everything explicitly in the comment, something like: > > /* ##spec## msvcrt "@ cdecl strcpy(ptr str) strcpy" */ > > (we can probably come up with a better syntax, but you get the idea). > Then we can simply grep for '##spec##' and extract everything into the > spec file. We can do the same for forwards etc. (and in fact we could > do it for normal entry points as well). For forwards, stubs and other special cases, perhaps. I don't like it very much but it is acceptable. But we need not decide that now. I will think more about it and come back later with some kind of proposal that might or might not match yours. I'm not sure, we will see. For normal entry point, however, I respectfully disagree. One of the major reasons of having automatically generated .spec files is to avoid having to store redundant information. The needed information is already in the C function declaration and storing in a comment as well brings us back to the current situation. Sure it makes that generator less complicatated but it really isn't that important as long as it is reliable and not ambigeous. PS. For the record: I consider winapi_extract a prototype not something that nessary will finally use in "production". We might of course use it, but I would rather rewrite it so it becomes simpler and more reliable. Perhaps it shouldn't be in Perl but in C instead? Oh, well, that is a minor issue compared to how the information should be stored.

1 0

To strip or not to strip
by Jeremy White 13 Jul '01

13 Jul '01

We've always built the CodeWeavers Wine RPM unstripped, in the theory that it made supporting Wine newbies easier. However, AFAICT from watching cemw, we never get into a situation where a newbie goes into winedbg; more often, they shift first to the CVS tip, and from there maybe to winedbg. So, it seems like shipping debug symbols may just be a waste of bandwidth. (Note, we build with all full logging enabled, and we'll never change that). However, before we go ahead and yank the debug info out of our RPM, I thought I'd post a note, and let someone tell me if I'm wrong. Thanks, Jer

1 0

Re: Documentation fixes
by Alexandre Julliard 12 Jul '01

12 Jul '01

Patrik Stridvall <ps(a)leissner.se> writes: > Like: > > /*********************************************************************** > * strcpy (MSVCRT.@) > */ > #if 0 /* Suppress warnings */ > extern char *strcpy(char *dest, const char *src); > #endif > > Perhaps we could do the same with atom functions and lstrcmpi? > The #if 0 #endif isn't even needed for them I believe. That's quite ugly IMO. As long as we require comments, we might as well put everything explicitly in the comment, something like: /* ##spec## msvcrt "@ cdecl strcpy(ptr str) strcpy" */ (we can probably come up with a better syntax, but you get the idea). Then we can simply grep for '##spec##' and extract everything into the spec file. We can do the same for forwards etc. (and in fact we could do it for normal entry points as well). -- Alexandre Julliard julliard(a)winehq.com

2 1

RE: Documentation fixes
by Patrik Stridvall 12 Jul '01

12 Jul '01

> > The problem is that if I say that the memory directory doesn't > > "belong" to dlls/user/user.spec winapi_{check,extract,fixup} will > > not find implementations for all functions, which will cause > > problems. > > > > For example how should winapi_extract know that I should > generate the line > > 471 pascal16 lstrcmpi(str str) lstrcmpiA > > when it generates the spec files? > > Well, it's a more general problem, namely that the spec files can > reference functions that are not implemented directly in the dll. > > You also have for instance: > > @ cdecl strcpy(ptr str) strcpy > > in MSVCRT, and strcpy is clearly not implemented there since it's in > the C library. So you cannot assume that only the functions contained > in the dll can be used in the spec files, it is legal for the spec > file to reference external functions. True. I didn't even thought of that particular problem. Functions like strcpy is currently suppressed by having it listed in tools/winapi_check/nativeapi.dat, but that is a little kludgy. [Thinking...] Well you could simply have an function documentation comment without a function implementation in some file that belongs to MSVCRT. Like: /*********************************************************************** * strcpy (MSVCRT.@) */ #if 0 /* Suppress warnings */ extern char *strcpy(char *dest, const char *src); #endif Perhaps we could do the same with atom functions and lstrcmpi? The #if 0 #endif isn't even needed for them I believe. > > I think that we need to move the solution of this problem one step > > up the "ladder" and discuss the more general problem: > > How should we store the information needed to generate > > the spec files in the source, especially concerning > > the forwards and stubs? > > You'll need a file somewhere that specifies all the entries that > cannot be determined automatically from the source. You simply cannot > build a 100% correct spec file based only on the function comments. Yes. I have some ideas, but no really good one. My currently best suggestion is having a .spec.in file that approximately looks like the .spec files but supports configure like substitutions. foo.spec.in: ---8<--- name foo type win32 init @init@ rsrc foo.res import baz.dll @debug_channels@ 101 forward Bar BAZ.Bar 102 stub BarFoo @fixed@ @ forward Foo BAZ.Foo @ stub FooBar @unfixed@ ---8<--- And simply let winapi_extract or whatever simple substitute @init@, @debug_channels@, @fixed@ and @unfixed@ with what can be extracted from the source. > And you definitely do not want to need to parse KERNEL source files > (like the ones in memory/) to build the USER spec file. Of course. The question was whether the memory directory belongs to USER or not. I have now accepted that it does not.

1 0

Re: Documentation fixes
by Alexandre Julliard 12 Jul '01

12 Jul '01

Patrik Stridvall <ps(a)leissner.se> writes: > > No, USER does not use the memory directory. It links directly to > > libkernel32.so because it needs some internal functions in there, > > Like the atom functions that are implemented in memory/atom.c I guess > you mean. Actually no, the atom functions are similar to lstrcmpi, they are exported from kernel so we don't need to link to libkernel32.so to get them (and they shouldn't have USER comments either). The real problem is the internal kernel functions called by user, things like THUNK_Alloc or LOCAL_Alloc. > The problem is that if I say that the memory directory doesn't > "belong" to dlls/user/user.spec winapi_{check,extract,fixup} will > not find implementations for all functions, which will cause > problems. > > For example how should winapi_extract know that I should generate the line > 471 pascal16 lstrcmpi(str str) lstrcmpiA > when it generates the spec files? Well, it's a more general problem, namely that the spec files can reference functions that are not implemented directly in the dll. You also have for instance: @ cdecl strcpy(ptr str) strcpy in MSVCRT, and strcpy is clearly not implemented there since it's in the C library. So you cannot assume that only the functions contained in the dll can be used in the spec files, it is legal for the spec file to reference external functions. > I think that we need to move the solution of this problem one step > up the "ladder" and discuss the more general problem: > How should we store the information needed to generate > the spec files in the source, especially concerning > the forwards and stubs? You'll need a file somewhere that specifies all the entries that cannot be determined automatically from the source. You simply cannot build a 100% correct spec file based only on the function comments. And you definitely do not want to need to parse KERNEL source files (like the ones in memory/) to build the USER spec file. -- Alexandre Julliard julliard(a)winehq.com

1 0

RE: Documentation fixes
by Patrik Stridvall 12 Jul '01

12 Jul '01

> Patrik Stridvall <ps(a)leissner.se> writes: > > > PS. And yes, the added lstrcmpi (USER.471) in memory/string.c > > should really be there. Both KERNEL and USER uses the memory > > directory. > > No, USER does not use the memory directory. It links directly to > libkernel32.so because it needs some internal functions in there, Like the atom functions that are implemented in memory/atom.c I guess you mean. > but > that's a different problem. lstrcmpi is a purely KERNEL function, that > happens to be imported by USER (and by other dlls too), That might be so, but it is also _exported_ by USER: grep lstrcmpi dlls/user/user.spec 471 pascal16 lstrcmpi(str str) lstrcmpiA and lstrcmpiA is not implemented anyware else The same goes for the atom functions: grep Atom dlls/user/user.spec 268 pascal16 GlobalAddAtom(str) GlobalAddAtomA 269 pascal16 GlobalDeleteAtom(word) GlobalDeleteAtom 270 pascal16 GlobalFindAtom(str) GlobalFindAtomA 271 pascal16 GlobalGetAtomName(word ptr s_word) GlobalGetAtomNameA > so USER must > not be mentioned in the comment IMO. The problem is that if I say that the memory directory doesn't "belong" to dlls/user/user.spec winapi_{check,extract,fixup} will not find implementations for all functions, which will cause problems. For example how should winapi_extract know that I should generate the line 471 pascal16 lstrcmpi(str str) lstrcmpiA when it generates the spec files? Of course the automatic generation of spec files is not 100% complete most importantly handling of forwards and stubs is not supported. I think that we need to move the solution of this problem one step up the "ladder" and discuss the more general problem: How should we store the information needed to generate the spec files in the source, especially concerning the forwards and stubs? I will address this issue in a separate mail, but you are welcome to add comments specific to this problem in this thread, I'm not sure I feel to writing it today. I have been postponing the writing of mail for quite some time and I'm currenly beginning to get rather tired. PS. Why not as an interim solution simply add support for forward in the Win16 spec files so 471 pascal16 lstrcmpi(str str) lstrcmpiA becomes 471 forward lstrcmpi(str str) USER32.lstrcmpiA which winebuild until actual need simply interprets as 471 pascal16 lstrcmpi(str str) lstrcmpiA Hmm. Perhaps we should have forward16 and forward to separate the pascal16 and pascal cases? Anyway this gives winapi_{check,fixup} enough information to handle the situation where the memory directory doesn't "belong" to dlls/user/user.spec.

1 0

Re: New problems with the debugger
by Uwe Bonnes 12 Jul '01

12 Jul '01

>>>>> "Alexandre" == Alexandre Julliard <julliard(a)winehq.com> writes: Alexandre> Uwe Bonnes <bon(a)elektron.ikp.physik.tu-darmstadt.de> writes: >> WineDbg starting... file_set_error: No such process Can't attach >> process 8068d98: error 317 Alexandre> I don't see this here. Could you please run wineserver under Alexandre> gdb, put a breakpoint on the file_set_error message Alexandre> (server/file.c line 334), and send me the backtrace at this Alexandre> point? Thanks. Breakpoint 1, file_set_error () at file.c:334 334 default: perror("file_set_error"); set_error( ERROR_UNKNOWN /* FIXME */ ); break; (gdb) bt #0 file_set_error () at file.c:334 #1 0x804b1e5 in get_thread_context (thread=0x97fa210, flags=65537, context=0xbffff350) at context_i386.c:142 #2 0x804b567 in get_thread_single_step (thread=0x97fa210) at context_i386.c:481 #3 0x8051d2e in continue_thread (thread=0x97fa210) at ptrace.c:177 #4 0x8050e9f in resume_process (process=0x8068d98) at process.c:518 #5 0x804bfc6 in debugger_attach (process=0x8068d98, debugger=0x97fa778) at debugger.c:420 #6 0x804c278 in req_debug_process (req=0xbffff4d8) at debugger.c:540 #7 0x805669f in read_request (thread=0x97fa778) at request.c:168 #8 0x805922b in thread_poll_event (obj=0x97fa778, event=1) at thread.c:157 #9 0x8057642 in select_loop () at select.c:262 #10 0x804e5af in main (argc=1, argv=0xbffff6d4) at main.c:108 #11 0x40178baf in __libc_start_main () from /lib/libc.so.6 Perhaps to notice: I run 2.4.6 on a SMP machine, Suse 7.1 Hope this helps Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel