http://bugs.winehq.org/show_bug.cgi?id=58590
Bug ID: 58590
Summary: PDF-XChange Editor: crashes when press ctrl+f
Product: Wine
Version: 1.3.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
Assignee: wine-bugs(a)winehq.org
Reporter: sherry.phasuta(a)gmail.com
Distribution: ---
Created attachment 79120
--> http://bugs.winehq.org/attachment.cgi?id=79120
This is the error I got
PDF-XChange Editor is crashes when I press ctrl+f
PDF-XChange Editor 64 bit
wine version 1.3.13
Ubuntu 25.04
https://www.pdf-xchange.com/product/downloads/enduser/pdf-xchange-editor
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58609
Bug ID: 58609
Summary: Dungeon Travelers crashes on startup
Product: Wine
Version: 8.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jwlj82268439(a)gmail.com
Distribution: ---
Created attachment 79150
--> http://bugs.winehq.org/attachment.cgi?id=79150
Screenshots and logs
Version 8.4 and any earlier worked fine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18234
Summary: Approach: Maximizing internalal minimized icon give
"About Wine"
Product: Wine
Version: 1.1.20
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Created an attachment (id=20742)
--> (http://bugs.winehq.org/attachment.cgi?id=20742)
About wine instead of a maximized window
Hi All,
In Lotus Approach, if you use the internal windows control (the low set of
caption buttons) to minimize a single database, it will appear as an icon in
the lower right of Approach's window. If you double click on the icon to
maximize the window again, you get "About Wine 1.1.20" (and no maximized
window)
Many thanks,
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58607
Bug ID: 58607
Summary: Finereader 10 Internal program error when saving
project & Multiple Fixme
Product: Wine
Version: 10.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: stasvernon(a)gmail.com
Distribution: ---
Created attachment 79144
--> http://bugs.winehq.org/attachment.cgi?id=79144
Many more "Fixme" when starting_Finereader
Hi,
In Finereader 10.0.102.130
1) Open a project with any images.
2) when saving a project it gives error:
"Internal program error
d:\build\branches\fr10.0.1001\0\awl\inc\imagelistawl.h, 134."
Errors in console specifically when saving a project:
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHAutoComplete stub
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
018c:fixme:shell:SHGetFileInfoW SHGFI_OVERLAYINDEX unhandled
Click OK and same error as above appears for the 2nd time.
Click OK again and finally "Save document window" appears.
Most recent development version of WINE from the WINE repo is installed.
No issues with OS.
Many more "Fixme" when starting the same Finereader can be found in the
attachment.
Thanks
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58421
Bug ID: 58421
Summary: Meta Trader 4 still does not start under Wine 10.9
Product: Wine
Version: 10.9
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tst1(a)mixbox.pl
Distribution: ---
After upgrading wine to 10.9 Meta Trader 4 still does not start.
But with this wine version it seams to be not the same issue as under wine 10.3
to 10.7 (described in https://bugs.winehq.org/show_bug.cgi?id=58011 and
https://bugs.winehq.org/show_ug.cgi?id=57950 ).
This time there in no error message window (as it was under wine 10.3 to 10.7)
and a try to start MT4 in the linux terminal generates other error (not the
same as previously) as shown below:
https://pastebin.com/kBLVS6G8
Downgrading to wine 10.2-2 temporary solves the issue (MT4 starts, at least
under Manjaro Linux, with Windows 11 set in wine settings).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57936
Bug ID: 57936
Summary: Incorrect audio volume level read by app from the
system - 100% all the time.
Product: Wine
Version: 10.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: greblus(a)gmail.com
Distribution: ---
Hi guys.
I'm trying to use Yousician on Linux and it works amazingly well, maybe even
smoother than on W11, but there is one small problem: It's impossible to
preform latency calibration as the app is checking global system volume, if
it's too high, it disallows calibration to prevent hearing damage if the sounds
it produces are too loud.
On wine and wine-staging the volume in Yousician is always 100%. I use
pipewire-pulse backend and plasma-pa, I'm changing volume from plasma settings
or alsamixer, or pulsemixer but it stays 100% in Yousician.
Hope there's an easy fix for it :).
Regards,
W.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45432
Bug ID: 45432
Summary: Implement Windows Native Firewall Rules for Lightwave
Software Licensing - netfw_rules
Product: Wine
Version: 3.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: newel.anderson(a)gmail.com
Distribution: ---
Created attachment 61753
--> https://bugs.winehq.org/attachment.cgi?id=61753
Terminal logs installing and launching Lightwave under WIne 3.11 in Linux
Lightwave requires Windows Native Firewall Inbound/Outbound Rules in order to
register/activate one's license.
For reference, please see:
https://forum.winehq.org/viewtopic.php?f=8&t=30847&p=116945#p116945 (I'm
wineink)
Towards the end of the above thread I posted terminal output as well as
screenshots. Disabling Windows Firewall, as well as deleting the
inbound/outbound rules in Windows, deactivates my license. Re-enabling the
rules and Windows Firewall reactivates my license. Since this functionality
doesn't exist in Wine, Wine hasn't to my knowledge implemented Windows Native
Firewall Rules, it's impossible to register/activate my legally purchased
license in Wine.
Thank you for your time and consideration.
***Please note, the above applies only to a FULL license of Lightwave. The
trial, which is node-locked, works as designed. Unfortunately, the FULL license
is not node-locked.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=55143
Bug ID: 55143
Summary: unimplemented function
winegstreamer.dll.winegstreamer_create_video_decoder
called in 32-bit code (0x7b012566)
Product: Wine
Version: 8.0.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winegstreamer
Assignee: wine-bugs(a)winehq.org
Reporter: zeroredgrave(a)gmail.com
Distribution: ---
Created attachment 74705
--> https://bugs.winehq.org/attachment.cgi?id=74705
Cannot Launch the App probably the introduction of the game( before main menu)
cannot create a video decoder i think
Max Payne 2 Cannot Launch due an unimplemented function
winegstreamer.dll.winegstreamer_create_video_decoder called in 32-bit code
(0x7b012566)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58599
Bug ID: 58599
Summary: Please add Debian forky repo and repoint Debian
testing repo to it
Product: Packaging
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-packages
Assignee: wine-bugs(a)winehq.org
Reporter: shtetldik(a)gmail.com
CC: dimesio(a)earthlink.net
Distribution: ---
Debian trixie got recently released and new testing is now forky.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.